Detail of Manufacturing Flash Tool
Are you looking for a tool or app?? Which allows flashing stock firmware on your device? Then don’t worry you are now on the right platform. Manufacturing Flash Tool is a useful Windows utility application.
You are going to download the Intel manufacturing flash tool for your PC. This is the latest version that will let you operate stock ROM and firmware installations. It will support all kinds of Android smartphones having an Intel chipset as a processor.
It helps users flash stock firmware on tablets and devices with the Intel Dual operating system. You can use it to flash multiple phones; however, if you want to use it as a flasher, you need to follow a few key points. And here we share all the details.
Intel Manufacturing Flashing Tool Features:
Here are some features of Manufacturing Flash Tool: These are the handy functions that you will have in your hands after installing this on your PC. No matter which kind of Windows OS you are looking for it to work.
Configure custom configuration including Test OS, Test OS VID, Test OS PID, Full OS, Full OS VID, Full OS Boot Time, Battery Voltage, Minimum Battery Voltage, Settings Password, Fast Boot Cmd Sleep time, BYT flash mode, ID SOC serial, and BYT CR different serials.
Helps you to see statistics of successful flashes, the number of flash trials, and the number of flash failures.
Helps you flash stock firmware on devices that support dual operating systems, including Android and Windows OS.
Supports All Windows
It supports all Windows Versions. You can use this tool on all computers running all versions of the Windows operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32-bit and 64-bit).
You need to install it on your computer to use it because It comes as an installer application, first, install the Intel drivers and then install the app, and you’re ready to use them.
Simple UI or user-friendly interface
The Flash tool has a very simple and user-friendly interface. Even if you are new to Android development, you can use this tool to flash the firmware on your device without any hassle. All you have to do is load the stock ROM in this device and click “Start to Flash” to flash the firmware on your device.
Supports Intel Dual OS Powered Devices
The flash tool supports all Intel dual OS-powered devices and works quickly on these devices. Do also check into the Intel platform flash tool on another page for perfect matching of platforms while flashing.
How to use Manufacturing Flash Tool?
Follow the steps given below to use the Intel Manufacturing Flash Tool to flash Intel devices
- Launch the Manufacturing Flash tool as an administrator
- Wait for the Manufacturing Flash Tool Dashboard to open
- Click File and open Settings
Under General Features, enter the VID and PID for the device’s chipset (SOC) and also the input for the device itself (you’ll need to find them) then click and click OK.
- Click File and Open it
- Visit the Dual OS Tablet firmware location, Flash_UserDbug. Highlight the XML file and then click Open.
- The tool should now appear ready to flash!
- And Boot the device into DnX mode then connect it to the PC via a USB cord. The device should start detecting and flashing
- Wait until the flashing is complete, do not interrupt the process
- After flashing is complete, you should see 100 Board Flash successfully
Disconnect the device (boot it if it does not boot automatically) then turn off the manufacturing flash tool
I hope this review helps you a lot and gives you all the information about Manufacturing Flash Tool. You can download it from our website. The setup of the Zip file is reliable and safe to use.