You can download the MI 6a flash file from the link locations on this page. The latest version of the Mi firmware is 100 % working on your Devices. These flash files come with all one solution for you to perform flashing on the go. We are proving the single-click downloads for different versions of the MI 6A flash file firmware.
With the help of these files, you can flash your MI at fastboot mode and EDL mode as well. This version of firmware is specifically for Xiaomi Redmi 6a stock firmware. This is a complete plashing package for your particular devices. So it always combines the Mi 6a USB driver, MI Flash tool, and a Flash file for Xiaomi Redmi 6a.
How to Flash Xioami Redmi 6A:
Follow these steps below, which will lead you to do the firmware flash on your Readme Mi 6a devices.
First of all download and install the MI Xioami flash tool on your PC. Install it and make it ready to use on your computer.
How to do Fastboot Flashing?
- Boot your phone into the mode and simply turn off the devices.
- New once completely turning off the devices.
- You have to turn it on again in fast boot mode.
- Press the Power On button + Volume Down button at the same time for 5 to 8 seconds.
- Now connect your devices to the computer via USB data cable.
- And launch the already installed Xioami MI Flash tool on your Windows.
- Click on the select button.
- Locate the firmware download from our website. Make sure to extract it after the download.
- Browse and select the Firmware MI 6a Flash file stock ROM.
- Click the OK button.
- Now, you can see the flash button on the right side of the MiFlash Tool.
- Go ahead with that and start flashing your Mi devices.
- The process now begins and you can get notified when successfully done.
That’s all, you did the flashing process very correctly and your devices are now ready to use.